You can get this Inverter via TBS or for example the german FPV Racing Online Store With this mod, you can get the full 400k baudrate for your TBS Crossfire System. I created the following PCB wich TBS and many online shops now sell. copy the firmware onto the SD Card into the „ FIRMWARE“ folder.Because of this we recommend to fix it properly in hardware if you have the soldering skills or ask FrSky for support on fixing the hardware. Using the lower baudrate the update rate is reduced to 62.5Hz (16ms). The regular update rate for CRSF between OpenTX and Crossfire is 250Hz (4ms). Due this workaround and the lower baudrate the latency will increase. If you lower it to 115’200baud instead of using 400’000baud the issue is resolved. This workaround will give you a baudrate selection on your X7 menu (main menu, hardare page). You can set the Baudrate to 115200 and your Crossfire Module will work without any issues.īe aware: The lower baudrate will slow down the CRSF protocol Your Radio Link to the aircraft is not affected, just the telemetry or LUA Script. The reason is a wrong (changed) inverter on the FrSky QX7, X10S & X12 wich can not handle the 400k baudrate of the CRSF protocol. If you get constant telemetry warnings or your LUA Script is not working, you might be affected. The current hardware revision of FrSKY QX7, X10S & X12 is not fully compatible with the TBS Crossfire protocol.
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |